Stop Scrubbing The Wall Behind Your Stove
Tired of scrubbing greasy surfaces that never really come clean?
Cooltex goes over the wall and cabinet fronts by your burners and takes the grease instead.
The metallic surface doesn't soak up oil the way vinyl liner does — splatter sits on top and wipes off in one pass.
Heat from the burners doesn't bother it.
Peel, press, done — no tools, no measuring.
Wipes clean in one pass — oil sits on top instead of soaking in
✓ Grease comes off in one wipe
Bacon splatter, oil mist, sauce spray. One pass with a damp cloth and the surface is clean again — no degreaser, no scrubbing pad.
✓ Saves 15 minutes of scrubbing a week
Instead of working at the same yellowed patch above the burners, you wipe and walk away. That's roughly an hour back every month.
✓ Protects the cabinets you can't replace
Grease stains sink into cabinet finish and don't come out. Cooltex takes the hit so the surface underneath stays the way it is.
✓ Metal look, not plastic shelf paper
Standard vinyl liner soaks up oil and softens near heat. This one has a smooth metallic face that stays put by the stove and stays wipeable.
✓ On the wall in under 2 minutes
Cut it with kitchen scissors, peel the backing, press it down. No tools, no glue, no help needed.
What you get today
- Cooltex self-adhesive kitchen liner sheet
- Grease and oil wipe off the surface instead of soaking in
- Cuts with regular scissors, peels and presses on — no tools
- Choice of 6 finishes
- Free tracked shipping
- 30-day money-back guarantee
Seasonal production run — once this batch sells out, restock pricing may change.
Try Cooltex today and stop scrubbing the wall behind your stove for good — for a limited time only.
30-day at-home trial
Try Cooltex at home for 30 days. If it doesn't deliver the intended result or isn't as easy to use as described, return it for a full refund.
Frequently asked questions
Will it damage my cabinets or paint when I take it off?
Pull it off slowly and at a low angle rather than straight out. On sealed cabinet finishes and painted walls it lifts away cleanly. On peeling or flaking paint, test a small corner first.
Can I put it directly behind a gas burner?
Yes, on the wall or backsplash behind the burners. Keep it off the burner grate itself and away from open flame contact.
How do I get it around outlets and cabinet handles?
Hold the sheet in place, mark the spot, then cut the shape out with scissors or a craft knife before you peel the backing. Cutting before you stick is much easier than trimming after.
What if I get a bubble under it?
Lift that section back up while the adhesive is fresh and press it down again from the center out. A credit card edge works well for pushing air toward the nearest edge.
How to use
- Step 1: Wipe the surface clean and let it dry fully. Adhesive won't hold on greasy or damp walls.
- Step 2: Hold the sheet up, mark your size, and cut with scissors. Cut around outlets and handles now, not later.
- Step 3: Peel back a few inches of the backing and line up the top edge first.
- Step 4: Press down from the center outward, pulling the backing away as you go. Takes 1–2 minutes per sheet.
Specifications
- Size: See size options at checkout
- Material: PVC with metallic finish
- Lasts: Stays put through daily cooking and regular wiping
How to wash
- Wipe with a damp cloth or a mild dish soap solution.
- Do not use abrasive pads or harsh scouring powder.
